SENNHEISER EW 512P G4
SENNHEISER EW 512P G4
The perfect solution for film-makers on large sets, operating up to 32 channels in parallel. The amazing bandwidth of up to 88 MHz and the increased RF output power ensure highest safety, no matter the conditions.
More Information
More Information
Technical Specification
Technical Specification
EK 500 G4 | |
Frequency range | |
AS: 520 - 558 MHz | |
Aw+: 470 - 558 MHz | |
Bw: 626 - 698 MHz | |
Cw: 718 - 790 MHz | |
Dw: 790 - 865 MHz | |
GBw: 606 - 678 MHz | |
Gw: 558 - 626 MHz | |
Gw1: 558 - 608 MHz | |
JB: 806 - 810 MHz | |
K+: 925 - 937,5 MHz | |
Bw: 626 - 698 MHz | |
Cw: 718 - 790 MHz | |
Dimensions | |
Approx. 82 x 64 x 24 mm | |
Compander | |
Sennheiser HDX | |
THD, total harmonic distortion | |
≤ 0.9 % | |
Weight | |
(incl. batteries) approx. 130 g | |
Audio output | |
3.5 mm jack socket: +17 dBu (mono, balanced) | |
Signal-to-noise ratio | |
Line: ≥ 110 dBA, Phones: approx. 90 dBA | |
Switching bandwidth | |
up to 88 MHz | |
Peak deviation | |
±48 kHz | |
Nominal deviation | |
±24 kHz | |
Operating time | |
Typically 8 h | |
Modulation | |
Wideband FM | |
Power supply | |
2 AA batteries, 1.5 V or BA 2015 accupack | |
Current consumption | |
at nominal voltage: typ. 140 mA | |
with receiver switched off: ≤ 25 µA | |
Adjacent channel rejection | |
Typically ≥ 65 dB | |
Intermodulation attenuation | |
Typically ≥ 65 dB | |
Powering | |
3 V battery / 2.4 V rechargeable battery | |
Receiving frequency | |
Max. 3520 receiving frequencies, adjustable in 25 kHz steps, 20 frequency banks, each with up to 32 factory-preset channels, no intermodulation, 6 frequency banks with up to 32 programmable channels | |
RF sensitivity | |
< 1.6 μV for 52 dBA eff S/N | |
Squelch | |
low: 5 dBµV, middle: 15 dBµV, high: 25 dBμV | |
Temperature Range | |
-10 °C to +55 °C | |
Receiver Principle | |
Adaptive diversity | |
Blocking | |
≥ 70 dB | |
SK 500 G4 | |
Dimensions | |
Approx. 82 x 64 x 24 mm | |
Compander | |
Sennheiser HDX | |
THD, total harmonic distortion | |
≤ 0.9 % | |
Weight | |
(incl. batteries) approx. 160 g | |
Signal-to-noise ratio | |
≥ 115 dBA | |
RF output power | |
switchable: Low: typ. 10 mW, Standard: typ. 30 mW, High: typ. 50 mW | |
Switching bandwidth | |
up to 88 MHz | |
Peak deviation | |
±48 kHz | |
Nominal deviation | |
±24 kHz | |
Operating time | |
Typically 8 h | |
Modulation | |
Wideband FM | |
Power supply | |
2 AA batteries, 1.5 V or BA 2015 accupack | |
Current consumption | |
at nominal voltage: typ. 180 mA | |
with transmitter switched off: ≤ 25 µA | |
Input impedance | |
40 kΩ, unbalanced / 1 MΩ | |
Max. Input voltage | |
3 Veff | |
Powering | |
3 V battery / 2.4 V rechargeable battery | |
Transmission frequency | |
Max. 3520 frequencies, adjustable in 25 kHz steps, 20 frequency banks, each with up to 32 factory-preset channels, no intermodulation, 6 frequency banks with up to 32 programmable channels | |
AF frequency response | |
Mic: 80 – 18,000 Hz, Line: 25 – 18,000 Hz | |
Temperature Range | |
-10 °C to +55 °C | |
Frequency stability | |
≤ ±15 ppm | |
MKE 2 | |
Connector | |
3.5 mm jack | |
Frequency response | |
20 to 20.000 Hz ± 3 dB | |
Max. sound pressure level | |
142 dB | |
Cable length | |
approx. 1.60 m | |
Transducer principle | |
pre-polarized condensor microphone | |
Pick-up pattern | |
omni-directional | |
Sensitivity in free field, no load (1kHz) | |
5 mV/Pa, ± 3 dB | |
Equivalent noise level | |
26 dB | |
Equivalent noise level weighted as per CCIR | |
39 dB |