Skip to product information
1 of 4



The PAA6 from Phonic is a 2-channel digital handheld audio analyzer that features a 480 x 272 color touch-screen display. The elegant graphical user interface allows all functions and menus to be easily accessed.

Functions include a real time spectrum analyzer, RT60 measurement, tone generator, LEQ, EQ setting and phase checking. Also available are SLM, FFT, THD+N measurement, and scope functions. The 2 built-in condenser microphones take highly accurate measurements in any given situation.

A USB connector and SD card slot have been included to assist in transferring information to and from a computer. This feature-rich, portable audio tester will satisfy the needs of professional audio engineers, regulatory enforcement agencies, and product development teams.

More Information

Features at a glance:

Powerful dual-channel, palm-size audio analyzer
Elegant graphical user interface controlled through touch screen
Functions include RTA, LEQ, RT-60, FFT, THD+N, Polarity, Phase, Scope, and Meter (dB SPL, dBu, dBV & Volt)
Long-lasting rechargeable lithium-ion battery system
Tone generator includes pink noise, white noise, sine wave, sweep, polarity, triangle, and square
Screen capture the current screen at the touch of a button
Sound pressure level measurable between 30 dB and 130 dB (SPL)

Unique features:

480 x 272 color LCD touch screen with touch pen
Two built-in measurement condenser mics can be put in 6 positions
USB 2.0 port and SD card slot included for storing and retrieving data

Technical Specification

  • Audio Analysis Functions:

    Real Time Analyzer (RTA)

    This function analyzes the audio received either form the built-in microphones or line-in connectors. RTA is divided into a number of separate bands in 1, 2/3rd, 1/3rd or 1/6th octave resolution. Each frequency band is graphed as a vertical bar on the RTA, the height of which represents the level—whether in dB SPL, dBu, etc.—of the individual octave or sub-octave bands. A 60dB range is displayed. If clipping occurs or the results aren't visible, you can scroll up or down the display. Frequencies from 20Hz to 20kHz can be monitored individually. Measurements can be taken at four different response times (35ms, 125ms, 250ms, and 1 sec) and in four weighting types (A weighting, B weighting, C weighting, and Flat).

    Acoustic Measurements

    With input set to Mic, you can select the appropriate weighting and either 1-octave resolution (for a total of 10 bands on the RTA), 2/3-octave resolution (for a total of 15 bands), 1/3-octave resolution (for a total of 31 bands), or 1/6-octave resolution (for a total of 61 bands). (Tip: The most common weighting for acoustical analysis is A-weighting, which most closely corresponds to human hearing.

    Electrical Signal

    Electrical signal is measured by setting the input source to Line and measurement unit to dBu, dBV, or voltage, followed by response time, weighting, octave, peak hold, frequency detect, and Subtract/Sum properties. Signal is received through the PAA6's female XLR jacks.

    EQ Setting

    Also included within the RTA is an EQ setting function. Pushing the onscreen icon will allow you monitor the suggested equalizer band settings, which are updated in real time. You can also load any pre-saved readouts as a reference and run the EQ Setting function to find the PAA6's suggested EQ readings. For excellent audio quality with little potential for feedback and other issues, the EQ Setting function should display a flat line with no suggested frequency adjustments.

    Compare Function (Subtract/Sum)

    This function allows you to add the results from channel 1 to channel 2, or subtract either channel from the other (to compare the difference in level).

    Fast Fourier Transform (FFT)

    The FFT function in essence, is an RTA with much finer resolution and slightly slower refresh rate. Use the FFT analyzer to check the frequency response of sound systems and listening rooms as you adjust your speaker positions, room treatments and equalizer settings. Like the RTA function, measurements can be taken at any weighting. A frequency range as wide as 0.2Hz to 20kHz can be monitored using the FFT function.

    Reverb Time (RT60)

    The RT60 function gives the decay time of any signal. The decay time is the time that it takes for a signal to diminish 60dB below the original sound. This can be done with no flat weighting or with A, B or C weighting. The RT60 calculations can also be made with no frequency filtering active (meaning the reverb time will be calculated for all frequencies, 20Hz to 20kHz) or with a 1-octave filter (the frequency of which can be selected from 10 preset values).

    Working out the average of many different RT60 readings from around a room gives you an idea as to how much absorption or reflection of audio the room provides. Depending on your needs, you may wish to have a high or low RT60 measurement. For example, for public speaking, an RT60 measurement of less than 1 second is preferable to provide speach intelligibility. With choirs or instrumental music, an RT60 measurement of greater than 1.5 seconds may be appropriate.

    Total Harmonic Distortion + Noise (THD+N)

    This function will give the total amount of distortion and noise in any given audio signal. The THD is the unwanted audio that is not directly a part of an audio signal, however still harmonically related to it. In an idea world, the output would show no audio artifacts combined with the original signal. Of course, real-world electronics are not perfect. In the case of THD+N, not only are the signals directly related to the audio signal tested, but so are other audio artifacts not directly related to the signal, e.g. noise, hum, buzz, RFI, etc., which are all included in the THD+N value.


    The meter function can take calculations in dB SPL (through the built-in microphone), dBu, dBV, or voltage (through the line inputs). The SPL function shows the the overall 'loudness' of the input signal and can be accessed by simply selecting 'Mic In' as the desired input source. The dBu, dBV, and Voltage measurements are taken via the line inputs with visual representation of their respective levels.


    The PAA6's phase meter gives visual and numerical representation (in degrees) of the phase difference between the two input signals. Sine waves with the same frequency must be used, however the levels can differ. However, levels and frequencies must be stable to obtain consistent measurements.


    This is an audio bandwidth oscilloscope. It provides an accurate graphic representation of audio waveforms, allowing you to identify distortion, clipping, and polarity problems.

    Equivalent Continuous Noise Level (LEQ)

    The LEQ is essentially a 10-band RTA that provides the linear average sound pressure levels over a pre-determined measure of time. The results of the LEQ can be taken for any period of time, from a few seconds up to a maximum of 48 hours. Results are updated on screen every second. This function is particularly useful for ensuring that noise standards are being met.

    Phonic PAA6 Applications

    The PAA6 can be used for studio, live sound and fixed installation: Measure room characteristics for optimal monitor placement and room treatment to achieve flat frequency response (essential for critical listening; treat rooms for absorption and diffusion; test speakers and cables for phase coherency, as well as signal running through a system; test preamps and processors for THD+N to ensure clean audio as track counts increase; measure nominal operation level throughout a system; calibrate monitor levels; measure EQ to ring out a room (find feedback frequencies); and test for clipping and other waveform anomalies.

    Whether you are a live sound or studio professional, or an aspiring amateur, the PAA6 Professional Audio Assistant should be in your toolkit.
View full details