Skip to product information
1 of 2



A studio monitor is no ordinary loudspeaker. Unlike a conventional speaker, a true monitor must be unerringly accurate, with a flat frequency response and vanishingly low distortion. It has to tell you, the music producer—dependably and unquestionably—exactly what is or is not in your recording. In a studio-grade monitor speaker, there is no place for the usual list of speaker colorations and limitations prevalent in conventional loudspeakers. Response peaks\dips, uneven polar response, high THD, nasal midrange, bloated mid-bass, and crossover-induced phase incoherence do nothing but undermine the confidence demanded for superior mix performance.

More Information

  • Bi-amplified design with 150 watts (80 LF, 70 HF) for powerful, accurate sound
  • 8” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
  • 1.25” natural silk dome tweeter delivers superb transient details
  • Computer-optimized tweeter waveguide for precise imaging
  • Acoustic Space Control to fine-tune low-end response to your room
  • Optimized rear port for extended low-frequency response
  • XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers DJ gear, and more
  • Volume control enables you to dial in the perfect monitor playback level
  • Wide range 37-22kHz frequency response covers full musical spectrum Front panel LED shines brightly when speaker is positioned at ideal monitor angle

Technical Specification

Type: 2-way near-field studio reference monitors

Low Freq. Driver: 8 inch (203 mm) Kevlar curved cone with high temperature voice coil and damped rubber surround, magnetically shielded

High Freq. Driver: 1.25 inch (32mm) magnetically shielded natural silk dome

Frequency Response: 37Hz – 22kHz

Crossover Frequency: 1.9kHz

Low Freq. Amplifier: Power: 85W

High Freq. Amplifier: Power: 75W

Maximum Peak SPL: 110dB

Input Sensitivity: 85mV pink noise input produces 96dBA output SPL at 1 meter with volume control at maximum

Input Connectors:
  • 1x XLR balanced input connector
  • 1x TRS balanced/unbalanced input connector

Input Impedance: 10kΩ balanced, 20kΩ unbalanced

Polarity: Positive signal at + input produce outward LF cone displacement

Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse

Power Requirements: Factory-programmed for 115V ~50/60Hz, 230V ~50/60Hz, or 100V ~50/60Hz

Cabinet: Vinyl-laminated high-acoustic-efficiency MDF

Dimension: (height x width x depth):

15in. x 10in. x 12in.

384mm x 250mm x 302mm

  • Weight (without packing): 26.4lbs., 11kg
View full details