MARANI DPA480P
MARANI DPA480P
DPA480P is a cost-effective 4-IN/8-OUT digital speaker management system. Designed to be catered for any crossover configuration, it provides the suitable processing and control necessary for both live and fixed installation use. It offers 4 analog inputs, 8 analog outputs, managed by a powerful MARANI® DSP Engine, in addition to high performance 24 bit AD/DA Converters.
Each input channel provides a choice of EQ with 30-band Parametric EQ, Gain control, Noise Gate Function, RMS Compressor and configurable Delay. Each output offers up to 7-band of parametric equalization, in addition to the crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features Peak Limiter, HP/LP Filters and driver alignment Delay.
The DPA480P supports a full matrix mixing mode where inputs may be routed/mixed in any ratio to any output. For remote configuration and control the DPA480P can be connected via USB or RS485 connections. The control remote PC software allows simultaneous control up to 32 units, setting all parameters and showing real time levels.
More Information
More Information
Technical Specification
Technical Specification
| Audio | |
| Analog Input | 4 x XLR electronically balanced |
| Analog Output | 8 x XLR electronically balanced |
| Minimun Load | 150 ohm |
| THD+N | 0.004% at 1kHz +4dBu |
| S/N | >106 dB A weight 22kHz BW |
| Frequency Response | 20Hz – 20kHz; ±0.5dB |
| AD & DA Converters | 24bit - 96kHz |
| DSP & Processing | |
| DSP Engine | MARANI® DSP |
| DSP Resolution | 24bit (data) x 24 bit (coeff.), 54 bit accumulation registers |
| 96 bit precision on intermediate processing data | |
| Parametric Equalization | 30 filters per input |
| 7 filters per output | |
| Filter Type | Bell, Hi/Lo-Shelving, HP/LP, Band Pass, Notch and All Pass Filters selectable |
| Filter Gain | From -15dB up to +15dB by 0.5dB resolution steps |
| Input&Output Level | From -18dB up to +18dB by 0.1dB resolution steps |
| Center Frequency | Selectable with a 1/48th of octave resolution step from 20Hz up to 20kHz |
| Filter Q/BW | Shelving/HP/LP Q from 0.1 up to 5.1; BP/Notch/All Pass Q from 4 up to 104 Bell Q from 0.4 to 128 |
| Crossover Section HPF/LPF | Butterworth 6/12/18/24 dB per octave Bessel 12/24 dB per octave Linkwitz-Riley 12/24/36/48 dB per octave |
| Input Noise Gate | Threshold from -80dBu up to -50dBu |
| Attack time from 1ms up to 1000ms;Release time from 10ms up to 1000ms | |
| Input RMS Compressor | Threshold from -14dBu up to +16dBu and Byp |
| Ratio 2:1~32:1; Knee: 0% ~ 100%; Makeup from -12dB to +12dB | |
| Attack time from 5ms up to 200ms;Release time from 0.1 sec up to 3 sec | |
| Output Peak Limiter | Threshold from -14dBu up to +16dBu and Byp |
| Attack time from 1ms up to 900ms;Release time from 0.1 sec up to 5 sec | |
| Input/Output Polarity | Normal (0°) / Inverted (180°) |
| Input/Output Mute | Off / On |
| Delay | 420.998 ms per input channel |
| 128.998 ms per output channel | |
| General | |
| Device Presets | 24 User Presets |
| Front Panel | 2x24 character LCD display with green LED backlight 7-LED meter per input channel -20dBu to +15dBu, clip 7-LED meter per output channel -15dBu to +15dBu, clip or limiter mode Blue LED (Edit) and Red LED (Mute) per channel NAV/PM1 Rotary encoder push button switch PM2, PM3, ENTER, ESC, UTILITY push button switches EDIT/MUTE push button per channel USB type B connector |
| Rear Panel | 4 x XLR female connector (Input) 8 x XLR male connector (Output) 2 x RS485 Connector 1 x Ground-lift toggle switch IEC C13 16A connector; Power on/off switch |
| Main AC | 90-240VAC (50/60Hz) – 40W |
| Dimensions | 19”x 1.75”x 9” (483x44x225mm) 1RU |
