YAMAHA MG20XU

specifications

More Info About YAMAHA MG20XU

Yamaha MG20XU Specs

Built-in Effects SPX Algorithm: 24 Programs
Parameter Control: 1 x Foot SW: (FX RTN CH On/Off)
Phantom Power +48 V
Digital I/O USB: USB Audio Class 2.0 Compliant
Sampling Frequency: Max 192 kHz
Bit Depth: 24-Bit
Input Channels 12 x Mono [Mic/Line]
4 x Mono/Stereo [Mic/Line]
Output Channels 2 x Stereo Out
1 x Monitor Out
1 x Headphone Out
4 x Aux Out
4 x Group Out
Bus Stereo: 1
Group: 4
Aux: 4
Pad 26 dB (Mono)
HPF 80 Hz, 12 dB/Oct (Mono/Stereo: Mic Only)
Compressor Threshold: +22 dBu to -8 dBu
Ratio: 1:1 to 4:1
Output Level: 0 dB to 7 dB
Attack Time: Approx 25 ms
Release Time: Approx 300 ms
Equalizer EQ High Gain: +15 dB / -15 dB, Frequency: 10 kHz Shelving
EQ Mid Gain: +15 dB / -15 dB, Frequency: Mono 250 Hz to 5 kHz Peaking, Stereo 2.5 kHz Peaking
EQ Low Gain: +15 dB / -15 dB, Frequency: 100 Hz Shelving
LED Peak LED: Turns On When Post EQ Signal Reaches 3 dB Below Clipping (Mono)
Level Meter: 2 x 12-Segment LED Meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]
Total Harmonic Distortion 0.03% at +14 dBu (20 Hz to 20 kHz), GAIN Knob: Min, 0.005% at +24 dBu (1 kHz), GAIN Knob: Min
Frequency Response +0.5 dB / -1.5 dB (20 Hz to 48 kHz), Refer to the Nominal Output Level at 1 kHz, GAIN Knob: Min
Equivalent Input Noise -128 dBu (Mono Input Channel, Rs: 150 Ohms, GAIN Knob: Max)
Residual Output Noise -102 dBu (STEREO OUT, STEREO Master Fader: Min)
Crosstalk -78 dB
Power Requirement AC 100 to 240 VAC, 50 / 60 Hz
Power Consumption 36 W
Dimensions 17.5 x 5.1 x 19.7″ / 444 x 130 x 500 mm
Net Weight 15.7 lb / 7.1 kg

*All specifications are subject to change without notice.