YAMAHA MG10XUF

specifications

More Info About YAMAHA MG10XUF

SPECIFICATIONS:
Outline
Mixing capability
– On-board processors: SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)
I/O
– Phantom power: +48 V
–  Digital I/O: USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit
Input Channels
– Mono[MIC/LINE]: 4
– Mono/Stereo[MIC/LINE]: –
– Stereo[LINE]: 3
Output Channels
– STEREO OUT: 2
– MONITOR OUT: 1
– PHONES: 1
– AUX SEND: 1
– GROUP OUT: –
Bus: Stereo: 1, AUX[FX]: 1
Input Channel Function
– PAD: 26 dB (Mono)
– HPF: 80 Hz, 12 dB/oct (Mono)
– COMP: 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec
– EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
– EQ MID: Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking
– EQ LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
– PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping
– Level Meter: 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]
General specifications
Total harmonic distortion: 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min
Frequency response: +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
Hum & noise level
– Equivalent input noise: -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
– Residual output noise: -102 dBu (STEREO OUT, STEREO master fader: Min)
Crosstalk: -83 dB
Power requirements:PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha
Power consumption22.9 W
Dimensions
– W: 275 mm (10.8″)
– H: 110 mm (4.3″)
– D: 390 mm (15.4″)
Net weight: 3.3 kg (7.3 lbs)

*All specifications are subject to change without notice.