Mackie Thump12BST Boosted 1300W 12" Advanced Powered Loudspeaker (Single)

specifications

More Info Mackie Thump12BST

Mackie Thump Specs

PA Speaker
Configuration Active 2-Way
Enclosure Type Bass-Reflex Loudspeaker
Total Power Capacity 1300 W
Amplifier Power Rating LF:
1000 W
HF:
300 W
Amplifier Class Class-D
Drivers
HF Driver 1 x 1.4″ / 35.6 mm Titanium Dome Compression Driver
LF Driver 1 x 12″ / 30.5 cm Woofer
Performance
Frequency Response 50 Hz to 23 kHz -10 dB
57 Hz to 20 kHz ±3 dB
Maximum SPL 126 dB
Coverage Angle 90° H x 60° V
I/O Impedance XLR Input:
8 Kilohms (Balanced)
1/4″ TS Input:
1 Megohms (Unbalanced)
XLR Line Output:
600 Ohms (Balanced)
Protections RMS, Thermal
Connectivity
Audio I/O 2 x Combo XLR-1/4″ TRS Balanced/Unbalanced Mic/Line Input
1 x XLR 3-Pin Balanced Mix Output
Bluetooth 4.2
Signal Processing
Crossover 2 kHz, 24 dB/Octave
EQ 3 x Contour:
±12 dB at 6 kHz (per Channel)
±12 dB at 2.5 kHz (per Channel)
±12 dB at 80 Hz (per Channel)
Filters High-Pass:
20 Hz to 400 Hz, 12 dB/Octave
Dynamic Processing Peak Limiter
Alignment Delay Yes
Power
AC Input Power Universal:
100 to 240 VAC, 50 / 60 Hz
AC Power Connector 1 x IEC
Power Consumption 75 W
Physical
Mounting Pole Socket
Fly Point
Monitor Angle 45°
Handles 1 x Each Side
Cooling Convection
Construction Material Metal Grille, Polypropylene
Operating Temperature 32 to 104°F / 0 to 40°C
Dimensions 14 x 14.1 x 24.2″ / 35.6 x 35.8 x 61.5 cm
Weight 29.3 lb / 13.3 kg
Packaging Info
Package Weight 36 lb
Box Dimensions (LxWxH) 26.25 x 17 x 17″

*All specifications are subject to change without notice.