JBL Control 88M Two-Way 8" Coaxial Mushroom Landscape Speaker (Single)

specifications

MORE INFO JBL CONTROL 88M
Frequency Response (-10 dB) 47 Hz – 16 kHz
Power Rating 240 W continuous program (2 h)
120 W (480 W peak), continuous pink noise (2 h)
100 W (400 W peak), continuous pink noise (100 h)
Transformer Taps 70 V: 60, 30, 15, and 7.5 W
100 V: 60, 30, and 15 W
Frequency Response ± 3dB 60 Hz – 15 kHz
Maximum Input Voltage 28 V
Sensitivity 87 dB, 1 W at 3.28′ / 1 m (average 80 Hz – 16 kHz)
Nominal Coverage Angle 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground)
Directivity Q Factor: 2.1
Directivity Index 3.2 dB
Maximum SPL 108 dB at 3.28′ / 1 m
Nominal Impedance 8 Ohms (at 8-Ohm setting)
Minimum Impedance 6.6 Ohms at 9.5 kHz
Insertion Loss Up to 0.5 dB at any tap setting
Thru 8 Ohms nominal
Crossover Type 2nd order LPF on LF and 2nd order HPF on HF
Recommended Protective High-Pass 45 Hz for 8-Ohm operation, 24 dB/octave
80 Hz for 60 W tap, 24 dB/octave
50 Hz for 30, and 7.5 W taps, 24 dB/octave
Low-Frequency Driver 8″ / 20 cm diameter LF driver, Kapton former, 1.5″ / 3.8 cm voice coil, polypropylene cone and polyurethane surround
High-Frequency Driver 1″ / 2.5 cm diameter HF driver polyetherimide (PEI) dome
Enclosure Material LDPE polyethylene plastic, 0.23″ / 6 mm wall thickness, UL94V-0 rated
Grille Powder-coated stainless steel
Environmental IP-55 rating per IEC529 (dust protected and protected against jets of water)
Exceeds MIL-SPEC 810 for humidity, salt spray, temperature & UV
Passes MIL-SPEC 202F for salt spray
Enclosure UL94V0 rated
Agency Rating UL1480, transformer UL recognized per UL1876, ROHS compliant
Terminals Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)
Wiring Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 0.87″ / 22 mm hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 0.16″ / 4.0 mm and 0.35″ / 9.0 mm.
Dimensions 20.7 x 14.0 x 14.0″ / 52.4 x 35.5 x 35.5 cm
Weight 17 lb / 7.8 kg
Packaging Info
Package Weight 24.4 lb
Box Dimensions (LxWxH) 23 x 19 x 19″

*All specifications are subject to change without notice.