JBL Control 85M Two-Way 5.25" Coaxial Mushroom Landscape Speaker (Single)

specifications

MORE INFO JBL CONTROL 85M
Frequency Response (-10 dB) 55 Hz – 18 kHz
Power Rating 160 W continuous program (2 h)
80 W (320 W peak), continuous pink noise (2 h)
45 W (180 W peak), continuous pink noise (100 h)
Transformer Taps 70 V: 30, 15, 7.5, and 3.8 W
100 V: 30, 15, and 7.5 W
Frequency Response ± 3dB 65 Hz – 16 kHz
Maximum Input Voltage 23.3 V
Sensitivity 86 dB, 1 W at 3.28′ / 1 m (average 80 Hz – 16 kHz)
Nominal Coverage Angle 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground)
Directivity Q Factor: 2.2
Directivity Index 3.4 dB
Maximum SPL 105 dB at 3.28′ / 1 m
Nominal Impedance 8 Ohms (at 8-Ohm setting)
Insertion Loss Up to 1.0 dB at any tap setting
Thru 8 Ohms nominal
Crossover Type 2nd order LPF on LF and 2nd order HPF on HF
Recommended Protective High-Pass 65 Hz for 8-Ohm operation, 24 dB/octave
60 Hz for 30 W tap, 24 dB/octave
50 Hz for 15, 7.5, and 3.7 W taps, 24 dB/octave
Low-Frequency Driver 5.25″ / 13.5 cm diameter LF driver, Kapton former, 1.4″ / 3.55 cm voice coil, polypropylene cone and polyurethane surround
High-Frequency Driver 0.75″ / 1.9 mm diameter HF driver polyetherimide (PEI) dome
Enclosure Material LDPE polyethylene plastic, 0.23″ / 6 mm wall thickness, UL94V-0 rated
Grille Powder-coated stainless steel
Environmental IP-55 rating per IEC529 (dust protected and protected against jets of water)
Exceeds MIL-STD 810 for humidity, salt spray, temperature & UV
Passes MIL-STD 202F for salt spray
Enclosure UL94V0 rated
Agency Rating UL1480, transformer UL recognized per UL1876, ROHS compliant
Terminals Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)
Wiring Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 0.87″ / 22 mm hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 0.16″ / 4.0 mm and 0.35″ / 9.0 mm.
Dimensions 17.0 x 11.5 x 11.5″ / 43.2 x 29.1 x 29.1 cm
Weight 12 lb / 5.5 kg
Packaging Info
Package Weight 15.7 lb
Box Dimensions (LxWxH) 20 x 16.5 x 15″

*All specifications are subject to change without notice.