ROLAND R 07 RECORDER
RECORDER PART
Tracks |
2 (stereo) |
4 (stereo x2) * WAV x 2 recording mode only | |
Signal Processing |
AD/DA conversion: 24 bits, 44.1/48/88.2/96 kHz |
Data Type |
[For Recording] * Stereo only |
WAVE: | |
Sampling Rate: 44.1/48/88.2/96 kHz | |
Bit Depth: 16/24 bits | |
MP3 (MPEG-1 Audio Layer 3): | |
Sampling Rate: 44.1/48 kHz | |
Bit Rates: 64/96/128/160/192/224/320 kbps | |
WAVE + MP3: | |
Sampling Rate: 44.1/48 kHz | |
Bit Depth: 16 bits | |
Bit Rates: 128 kbps | |
WAVE x 2: | |
Sampling Rate: 44.1/48 kHz | |
Bit Depth: 16/24 bits | |
[For Playback] | |
WAVE: | |
Sampling Rate: 32/44.1/48/88.2/96 kHz | |
Bit Depth: 16/24 bits | |
MP3 (MPEG-1 Audio Layer 3): | |
Sampling Rate: 32/44.1/48 kHz | |
Bit Rates: 32--320 kbps or VBR (Variable Bit Rate) | |
Memory Card |
microSD Card |
SDHC format compatible |
INPUT/OUTPUT
Audio Inputs |
Internal Stereo Microphone |
MIC/AUX IN (Stereo miniature phone type, plug-in powered mic) | |
*The Internal Mic and the MIC/AUX IN can't be used at the same time; only the MIC/AUX IN is effective. | |
Audio Output |
Phones (Stereo miniature phone type) |
Internal Speaker for playback (monaural) | |
*The Internal Speaker and the Phones can't be used at the same time; only the Phones is effective. | |
Nominal Input Level (Variable) |
MIC/AUX IN: -31 dBu (Default input level) |
* 0 dBu = 0.775 Vrms | |
Input Impedance |
MIC/AUX IN: 4.5 k ohms |
Output Level |
3 mW + 3 mW (In case 16 ohms load) |
Recommended Load Impedance |
16 ohms or greater |
Frequency Response |
20 Hz – 40 kHz (+-3 dB) |
USB Interface |
USB port: USB Micro-B type |
Supports USB 2.0/1.1 mass storage device class | |
Supports USB audio class 1.0 (44.1 kHz or 48 kHz, *R-07 system program Ver. 1.100 or later) |
BLUETOOTH
Bluetooth |
R-07 Remote: Bluetooth technology: Bluetooth Ver 4.0 |
Transmitting Power: Specification Power Class 2 (Line of sight range 10 m (30 ft)) | |
Profile Support: A2DP, AVRCP | |
CODEC Support: SBC, Qualcomm aptX Qualcomm aptX low latency |
EFFECTS
Effects |
Playback only. Excludes playback in 88.2 kHz or 96 kHz. |
Reverb and Speed Change can't be used at the same time. | |
Reverb |
4 types (Hall1, Hall2, Room, Plate) |
Speed Change |
50 – 150 % of playback speed |
OTHERS
Display |
Graphic LCD 128 x 64 dots (white backlit) |
Power Supply |
Alkaline battery (AA, LR6) x 2, |
or Rechargeable Ni-MH battery (AA, HR6) x 2, | |
or Supplied from the computer via USB | |
Operating System (USB Audio Class 1.0) |
Windows 7, Windows 8.1, Windows 10 |
OS X 10.10, OS X 10.11, macOS 10.12, macOS 10.13, macOS 10.14 | |
Operating System (USB Audio Class 1.0) | iOS 11, iOS 12 |
Current Draw |
350 mA (MAX) |
Duration of continuous use with Alkaline battery operation |
Playback: Approximately 15 hours |
Recording: Approximately 15 hours | |
* This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use. | |
Accessories |
Leaflet “Read Me First” |
Owner’s manual | |
microSD card (inserted in the R-07) | |
Batteries (two AA) | |
Options |
Windscreen: R07-WS |
Microphone Stand Adaptor: OP-MSA1 | |
Binaural Microphones / Earphones: CS-10EM |
SIZE AND WEIGHT
Width |
61 mm |
2-7/16 inches | |
Depth |
103 mm |
4-1/16 inches | |
Height |
26 mm |
1-1/16 inches | |
Weight (including batteries) |
150 g |
6 oz |