RODE NTG4+
| Microphone | |
| Form Factor | Stand/Boom Mount |
| Sound Field | Mono |
| Operating Principle | Line Gradient |
| Capsule | Condenser |
| Diaphragm | 0.5" / 12.70 mm |
| Polar Pattern | Supercardioid |
| Orientation | End Address |
| Circuitry | Solid-State |
| Pad | -10 dB |
| High-Pass Filter | 75 Hz |
| Tone Adjustment | High Boost: +6 dB |
| Gain Adjustment | None |
| Indicators | Single LED (Status, Power) |
| On-Board Controls | High-Pass Filter, HF, Pad, On/Off |
| Windscreen | Foam (Included) |
| Performance | |
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 135 dB SPL |
| Off-Axis Rejection | 5 dB at 60° 24 dB at 120° 18 dB at 180° |
| Impedance | 200 Ohms |
| Sensitivity | -32 dBV/Pa at 1 kHz |
| Dynamic Range | 119 dB |
| Signal-to-Noise Ratio | 78 dB |
| Equivalent Noise Level | 16 dB A-Weighted |
| Output Connectors (Analog) | 1 x XLR 3-Pin |
| Power | |
| Operating Voltage | 48 V |
| Operating Current Consumption | 4.8 mA (Phantom Power) |
| Battery Type | 1 x Built-In (Included) |
| Battery Chemistry | Lithium-Ion |
| Approximate Battery Life | 150 Hours |
| Physical | |
| Color | Black |
| Mounting | Mic Clip/Stand Adapter (with Included Hardware) |
| Mounting Thread Size | 5/8"-27 Female (3/8"-16 Female with Included Adapter) |
| Included Case | Zipper Pouch |
| Construction Material | Metal |
| Dimensions | ø: 0.87 x L: 10.94" / ø: 22 x L: 278 mm |
| Weight | 6.21 oz / 176 g (Microphone) |