QSC WL2102 WideLine-10 Line
| QSC WL2102-TG Specs | |
| Configuration | Bi-amp or Tri-amp mode |
| High Frequency Transducer | 1.4" exit, 3" titanium diaphragm, neodymium magnet assembly |
| Low Frequency Transducer | 2 x 400 W, 16 Ohms 10" woofer, 3" voice coil, ceramic magnet assembly |
| Frequency Response | 55 Hz to 18 kHz @ ± 3 dB (with recommended DSP processing) 48 Hz to 20 kHz @ -10 dB (with recommended DSP processing) |
| Nominal Impedance | HF: 16 Ohms LF Bi-amp Mode: 8 Ohms LF Tri-amp Mode: 16 Ohms (x 2) |
| Power Capacity | HF: 80 W (2 hours, AES1984-2 method, 1 to 10 kHz) LF Bi-amp Mode: 600 W (2 hours, AES1984-2 method, 80 to 800 Hz) LF Tri-amp Mode: 400 W (x2) (2 hours, AES1984-2 method, 80 to 800 Hz) |
| Recommended Power | HF: 300 W @ 16 Ohms LF Biamp Mode: 1400 W @ 8 Ohms LF Triamp Mode: 700 W @ 16 Ohms (x2) |
| Sensitivity | HF: 107.5 dB (single cabinet measured in free space) LF: 98 dB (single cabinet measured in free space. LF drivers connected in parallel) |
| Maximum Output | Continuous: HF: 127 dB LF: 127 dB Peak: HF: 133 dB LF: 133 dB |
| Nominal Coverage Angle | Horizontal: 140° Vertical: Dependent on number of elements used |
| Cabinet | Ported, trapezoidal |
| Enclosure Material | Cored composite |
| Finish | Black tour grade with LINE-X |
| Grille | Perforated, formed powder coated steel |
| Connectors | 2 x Neutrik Speakon NL8 in parallel |
| Attachment | Integral, adjustable rigging system, vertical splay adjustable in 1° increments from 2° to 10° and 0° |
| Dimensions | 10.75 x 27.5 x 20.25" (27.3 x 69.85 x 51.43 cm) |