QSC AD-S10T
Speaker | |
Active or Passive | Passive |
Number of Included Speakers | 1 |
Speaker Configuration | 2-Way |
Power Handling | For 2 Hours / At Low-Z: 250 W RMS |
Recommended Amplifier Power | 500 W |
Constant Voltage / Transformer Taps | 70 V: 100 / 50 / 25 / 12.5 W or 8 Ohms Bypass 100 V: 100 / 50 / 25 W or 8 Ohms Bypass |
Impedance | 8 Ohms (Transformer Bypassed) |
Transformer Wattage | 100 W |
Enclosure Type | Sealed |
Shielded | No |
Drivers | |
HF Driver | 1 x 1" / 2.54 cm Compression Driver |
HF Voice Coil | 1.4" / 3.56 cm |
LF Driver | 1 x 10" / 25.4 cm Paper Woofer |
LF Voice Coil | 2.5" / 6.35 cm |
Performance | |
Frequency Range | 50 Hz to 19 kHz -10 dB |
Maximum SPL | 116 dB (Continuous) 122 dB (Peak) |
Sensitivity | 92 dB SPL |
Coverage Angle | 90° (Conical) |
Directivity | 10 (Directivity/Q Factor) 10 dB (Directivity Index) |
Maximum Input Voltage | 45 V RMS |
Connectivity | |
I/O | 1 x Block 4-Pole Speaker Input/Thru (Removable) |
Environmental | |
Water / Weather Resistance | Dust Resistant, Humidity Resistant, Water Resistant |
IP Rating | IP54 |
Operating Temperature | -4 to 122°F / -20 to 50°C |
Physical | |
Color | Black |
Mounting | 1 x Bracket Point (Rear) 2 x M10 Suspension (Bottom) |
Construction Material | ABS, Aluminum Grille, Polymer |
Dimensions | 20.3 x 12.5 x 11.7" / 51.56 x 31.75 x 29.72 cm |
Weight | 31 lb / 14.1 kg |