MARANI DPA480A specs

Audio
Analog Input 4 x XLR electronically balanced
Analog Output 8 x XLR electronically balanced
Digital Input 2 x AES/EBU; Gain 0dBu
Minimum Load 150 ohm
THD+N ≤0.005 @1kHz 20dBu
≤0.004 @1kHz 0dBu 
S/N >112dBA
Max Input Level +20 dB
Max Output Gain +20 dB
Frequency Response 20Hz – 20kHz; -0.5dBu at 20Hz and 20kHz
AD & DA Converters 24bit -96kHz
DSP & Processing
DSP Engine 2 x MARANI® DSP
DSP Resolution 24 bit (data) x 96 bit (coeff.), 54bit accumulation registers,  96 bit precision on intermediate processing data
FIR for Phase Correction Asymmetrical 1024 Taps, with coefficients generated by Pc Sw embedded Wizard tool, allowing also FIR latency Adjustment/reduction.
Coefficients can also be imported by external third party applications, so as can be exported to third parties applications 
Parametric Equalization 13 PEQ filters per input 
7 filters per output 
Filter Type Bell, Shelving, HP/LP, Band Pass, Notch Filter and All Pass 
Filter Gain From -15dBu up to +15dBu by 0.5dBu resolution steps
Input&Output Gain From -18dBu up to +12dBu by 0.5dBu resolution steps
Center Frequency from 20Hz up to 20kHz with 1Hz resolution steps
Filter Q/BW Bell Type: Q from 0.4 up to 128 in 100 steps
Shelv/Hp/LP Type: Q from 0.1 up to 5.1 in 100 steps
BandPass/Notch Type: Q from 4 up to 104 in 100 steps
IIR Crossover section HP/LP  Butterworth 6/12/18/24dB per octave
Bessel 12/24dB per octave
Linkwitz-Riley 12/24/36/48 dB per octave
FIR X-Over Section Hp/Lp/Bp Hp/Lp/Bp filters, Taps from 256 up to 512, Attenuation up to -120dB, Window type as Rect / Sinc / Keiser / Hanning / Hamming / Blackman / Nuttal / Sine 
Internal Noise Generator White/Pink Noise; Level from -40dBu to 0dBu
Input Noise Gate Threshold from -80dBu up to -50dBu
Attack time from 1ms up to 1000ms; Release time from 10ms up to 1000ms
Input&Output RMS Compressor Threshold from 20dBu up to -10dBu
Ratio: 2:1~32:1; Knee: 0~100%;
Makeup from -12dBu to +12dBu
Attack time from 0.1ms up to 5000ms; Release time from 0.001sec up to 10sec
Output Peak Limiter Threshold from 20dBu to -10dBu
Attack time from 0.1ms up to 900ms; Release time from 0.04sec up to 6sec
Routing Full matrix mixing mode 
Delay 480 ms 10.4us increment/decrement steps per input, 340ms 20.8us increment/decrement steps per output
Ground Noise -90 dBu
General
Device Presets up to 16 User Presets
Front Panel 2 x 24 character LCD display with green LED back light
7-LED meter per input channel -15dBu to +15dBu, clip and limiter mode
7-LED meter per output channel -15dBu to +15dBu, clip and limiter mode
Blue LED (Edit) per channel
Red LED (Mute) per channel
NAV/PM1 Rotary encoder push button switch
PM2, PM3, ENTER, ESC, UTILITY push button switches
EDIT/MUTE push button per channel
USB type A connector
Rear Panel (2+2) x XLR female connectors (4 x Analog Input or 2 x AES/EBU)
8 x XLR male connectors (Output)
1 x RJ45 connector for RS485 (Input)
1 x RJ45 connector for RS485 (Output)
1 x RJ45 connector for TCP-IP
1 x Ground-lift toggle switch
1 x Analog/Digital toggle switch
IEC C13 16A connector; Power on/off switch
Main AC 90-240VAC (50/60Hz) – 40W
Dimensions 19”x 1.75”x 9” (483x44x229mm) 1RU