MARANI DPA260P & RTA
| Marani DPA260A Specs | |
| Analog I/O | 2x XLR electronically balanced inputs, 6x XLR electronically balanced outputs |
| Digital Input | 1x SPDIF; gain 0 dBu |
| Minimum Load Impedance | 150 ohm |
| THD+N | 0.001% at 1 kHz 0 dBu |
| S/N | >110 dBA |
| Frequency Response | 20 Hz - 20 kHz; -0.5 dBu at 20 Hz and 20 kHz |
| Converters | 1x AK5388 24-bit 3x AK4396 24-bit |
| DSP | Dream SAM3716, 24-bit (data) x 96 bit (coeff.) |
| Internal DSP Resolution | 24 × 32-bit for filtering process 96-bit resolution on intermediate computation results |
| Parametric Equalizer | 5 filters per input selected as Bell or Shelving 7 filters per output selected as Bell or Shelving |
| Filter Type | Bell, 1st /2nd Order Shelvings with -3dB at cutting freq |
| Gain Control | From -15 dBu up to +15 dBu by 0.5 dBu resolution steps |
| Center Frequency | Selectable with a 1/24th of octave resolution step from 20Hz up to 20kHz |
| Bandwidth Control | Q from 0.5 up to 3 by 0.05 resolution steps |
| Crossover | Butterworth 6/12/18/24 dB per octave Bessel, Linkwitz-Riley 12/24 dB per octave Filter resolution 1/24th of octave |
| Limiter | Threshold from 20 dBu up to -10 dBu Attack time from 5 ms up to 200 ms (1 ms resolution up to 20 ms, 10 ms resolution up to 100 ms and 20 ms resolution up to 200 ms) Release time from 0.1 sec up to 3 sec (0.1 sec resolution) |
| Delay | 848,998 ms 21 us increment/decrement steps per channel |
| Presets | 24 user presets |
| Front Panel | 2×24 character LCD display with green LED backlight 7-LED meter per input channel -20 dBu to +15 dBu, clip 7-LED meter per output channel -15 dBu to +15 dBu, clip and limiter mode Blue LED (Edit) per channel Red LED (Mute) per channel NAV/PM1 Rotary encoder push button switch PM2, PM3, ENTER, ESC, UTILITY push button switches EDIT/MUTE push button per channel |
| Rear Panel | 2x XLR female connector (input) 6x XLR male connector (output) 1x RCA connector (SPDIF input) 1x XLR female connector for RS485 (input) 1x XLR male connector for RS485 (output) USB type A connector 2x Ground-lift toggle switch IEC C13 16A connector Power on/off switch |
| AC | 90 - 240 VAC (50/60 Hz) - 40 W |
| Dimensions | 19 x 1.75 x 9" (483 x 44 x 229 mm), 1RU |
| Weight | 7.71 lb (3.5 kg) |