| Power Rating |
1750 Watts Peak875 Watts Continuous |
| Frequency Range (-10dB) |
57 Hz - 20 kHz |
| Dimensions (H x W x D) |
349 mm x 597 mm x 444 mm(13.75 in x 23.5 in x 17.5 in) |
| Frequency Response |
75 Hz - 20 kHz (+/-3db) |
| Maximum SPL (1m) |
136 dB SPL |
| Coverage Pattern |
100 x 15 nominal |
| DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance) |
LF: 750 Watts, HF: 125 Watts |
| DPC-2 Output Section |
LF: Dual-Bridged Technology, Class D |
| Inputs |
XLR with loop through |
| LF Driver |
1 x JBL 2262FF 305 mm (12 in) neodymium magnet |
| HF Driver |
3 x JBL 2408J, 38 mm (1.5 in) |
| User Controls |
Input Attenuator (0-16 dB) |
| Signal Processings |
DSP based, resident in Input Module |
| AC Power Operating Range |
90-132 VAC or 216-264 VAC, 50/60 Hz |
| AC Input Connector |
Neutrik PowerCon (NAC 3MPA) |
| AC Loop Through Connector |
Neutrik PowerCon (NAC 3MPB) |
| AC Current Requirements |
6A per system at 120V, 3A per system at 240V |
| Enclosure |
25/15 mm, 11-ply birch plywood |
| Suspension / Mounting |
Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting |
| Finish |
Black DuraFlex finish |
| Grille |
Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam |
| Net Weight (each) |
24 kg (52 lb) |
| Optional Accessories |
VRX-AF: Suspension array frame |
| Outputs |
1 x XLR |
| System Type |
Constant Curvature 12" Two-Way Powered Line Array System |
| Nominal Impedance |
NA - amplification is integrated |
