HARTKE HA3500
Hartke HA3500C Specs | |
Input Sensitivity | Passive: 100 kOhms, 20 mV Active: 100 kOhms, 60 mV |
Connectors | Front Panel: 1 x 1/4" phone jack, passive input 1 x 1/4" phone jack, active input Rear Panel: 1 x AC input 2 x 1/4" phone jack, speaker output 1 x 1/4" phone jack, effect send 1 x 1/4" phone jack, effect return 1 x 3-pin XLR male, direct output |
Controls | Front Panel: 1 x Pre-amp A tube control knob 1 x Pre-amp B solid state control knob 1 x Compression knob 1 x Graphic equalizer in/out switch 10 x Graphic EQ control slider 1 x Contour low pass control knob 1 x Contour high pass control knob 1 x Master volume control knob 1 x Power switch Rear Panel: 1 x Fuse sled 1 x Balance control knob (HA3500C and HA5500C only) 1 x Direct out post/pre switch 1 x Direct out normal/ground lift switch |
LED Indicators | 1 x Compression, green/red 1 x Graphic equalizer 1 x Power |
Rated Output Power | 350 W @ 4 ohms, 240 W @ 8 ohms |
Signal to Noise Ratio | Approximately 78 dB |
Equalizer | Contour Low Pass: ± 18 dB @ 100 Hz Contour High Pass: ± 18 dB @ 10 kHz Ten-Band Graphic: ± 15 dB, center detented @ 30 Hz, 64 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 3 kHz, 5 kHz, and 8 kHz |
Dimensions | 17.3 x 14.0 x 3.5" (44.0 x 35.5 x 8.9 cm) |
Weight | 24.3 lb (11.0 kg) |