AMPHENOL KS3P
Materials
| Shell Material | Diecast Zinc Alloy EZDA No.3 |
| Finish | Connector Shell Finish: Satin-nickel |
| Insulator | PA66 |
| Bushing | Santoprene |
| Contacts | Brass |
| Plating | Nickel |
General
| Contacts | 3-pole |
| Termination | Solder |
| Wire Gauge | AWG 18 - 1mm² |
| Flammability Rating | Rating of Insulated Plastics: UL94V-0 |
| Solderability | Complies with IEC 68-2-20 |
| Environmental | Complies with EU RoHS 2 Directive 2011/65/EU |
Electrical Characteristics
| Maximum Current Capacity | >0.5 mA (depends on mating connector and cable) |
| Contact Resistance | ≤ 20 mOhm (depends on mating connector and cable), typical |
| Insulation Resistance | Initial: > 200 MOhm After damp heat test: > 100 MOhm |
| Voltage | Test voltage AC RMS: 250 VAC |
Environment
| Protection Class | IP40 |
| Operating Temperature | -4 to +149°F / -20 to 65°C |
Mechanical Characteristics
| Insertion / Withdrawal Force | < 20 N / > 3 N (depends on mating connector) |
| Mechanical Operation | 1000 mating cycles |
| Cable O.D. | 0.118 to 0.196" / 3 to 5 mm |
| Weight | 0.3 oz / 8 g |