Skip to product information
1 of 2

RCF LF 18N401

RCF LF 18N401

Incredibly linear frequency response characteristics,the highest power handling of any comparable 18-inch neodymium transducer, the lowest power compression. The LF18N401 uses a fibre loaded cone assembly along with a high excursion triple roll,constant geometry surround. This combination provides remarkablestrength venting system guarantee a very efficient voice coil ventilation for minimum power compression and higher power handling.

More Information

  • 4 - inch, fiberglass inside-outside copper voice coil
  • 2400 Watt continuous program power handling
  • 98 dB Sensitivity
  • 30 Hz - 1 kHz Frequency range
  • Dual-forced air ventilation and 15mm top plate for minimum power compression
  • Dual spider design with silicon based dampening control
  • Triple-roll surround and corrugated straight cone geometry

Technical Specification

General Specifications

  • Nominal Diameter: 460mm / 18inch
  • Rated Impedance: 8 O
  • Program Power: 2400 W AES
  • Power handling capacity: 1200 W AES
  • Sensitivity: 98 dB
  • Frequency Range: 30 Hz - 1000 Hz
  • Effective Piston Diameter: 395mm / 15.6inch
  • Max Excursion Before Damage (peak to peak): 52mm / 2.1inch
  • Minimum Impedance: 6.3 O
  • Voice Coil Diameter: 100mm / 4inch
  • Voice Coil Material: Copper
  • Voice Coil Winding Depth: 25mm / 1.0inch
  • Number of layers: 2
  • Kind of layer: inside / outside
  • Top Plate Thickness: 15mm / 0.6inch
  • Cone Material: No pressed pulp
  • Cone Design: Straight
  • Surround Material: Polycotton
  • Surround Design: Triple roll

Thiele/Small Parameters

  • Resonance Frequency FS: 32 Hz
  • DC resistance: 5.1 Ohms
  • Mechanical factor: 6.5
  • Electrical factor: 0.27
  • Total factor: 0.26
  • BL Factor: 27.8 T · m
  • Effective Moving Mass: 201 g
  • Equivalent Cas air load: 257 litres
  • Effective piston area: 0.122 m²
  • Max. linear excursion (mathematical): 8.8 mm
  • Voice - coil inductance @ 1kHz: 2.5 mH
  • Half-space efficiency: 3.01%

Mounting information

  • Overall Diameter: 465mm / 18.3inch
  • Bolt Circle Diameter: 442-447mm / 17.4-17.6inch
  • Bolt Hole Diameter: 6.5mm / 0.3inch
  • Front Mount Baffle Cut-out: 424mm / 16.7inch
  • Rear Mount Baffle Cut-out: 424mm / 16.7inch
  • Depth: 205mm / 8.1inch
  • Volume occupied by the driver: 5.5 litre s/ 0.19 ft³
  • Net Weight: 9.1 kg / 20.2 lbs
View full details