Skip to product information
1 of 3

DBX iEQ15

DBX iEQ15

With an EQ heritage that has produced countless industry standard patents and dates back more than 30 years, the dbx iEQ-31 easily lives up to the dbx legacy of uncompromised sonic integrity. In addition to unsurpassed equalization specs, the iEQ-15 also offers the built-in necessities which include AFS™ feedback Suppression, Type V™ noise reduction and PeakStopPlus® limiting. Besides including two 15-band channels of 2/3-octave equalization, the iEQ-15 also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs, nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.

The iEQ series represents a major step forward in the performance of EQs. The iEQ series is now able to offer state-of-the-art digital EQ performance and specs with an analog look and feel. From its amazing 10Hz to 22kHz frequency response, to its 113dB dynamic range and Advanced Feedback Suppression (AFS™), dbx proprietary Type V™ noise reduction and PeakStopPlus® limiting, the iEQ-15 offers out of this world specifications with a downto- earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the iEQ-15 is destined to take its rightful place in the lineage of great dbx® signal processors that are the professional’s choice in signal processing. With such pristine design and quality, the iEQ-15 offers the maximum sonic flexibility in a straight forward interface and rock-solid construction.

More Information

Features

  • Advanced Feedback Suppression (AFS™)
  • Type V™ Noise Reduction
  • PeakStopPlus® Limiting
  • 2/3-octave Constant Q frequency bands
  • Switchable boost/cut ranges of +6 or +15dB
  • 18 dB per octave 40Hz low-cut filter
  • +12dB input gain range
  • XLR, TRS and Euroblock Inputs and Outputs
  • Internal Toroidal Transformer
  • Frequency Response of 10Hz to 22kHz
  • Dynamic range of greater than 113dB
  • User Power Up Features
  • Relay Bypass for Power Failure System Protection

Technical Specification

Inputs
  • Connectors: 1/4" TRS, female XLR (pin 2 hot), and Euroblock
  • Type: Electronically balanced/unbalanced, RF filtered
  • Impedance: Balanced 40k ohm, unbalanced 20k ohm
  • Max Input Level: >+22dBu balanced or unbalanced
  • CMRR: >40dB, typically >55dB at 1kHz

Outputs

  • Connectors: 1/4" TRS, male XLR (pin 2 hot), and Euroblock
  • Type: Active-balanaced/unbalanced, RF filtered
  • Impedance: Balanced >120 ohm, unbalanced >60 ohm
  • Max Output Level: >+20dBu balanced/unbalanced into 2k ohm or greater

System Performance

  • Frequency Response: 20Hz to 20kHz, +0.5/0.25dB
  • Dynamic Range: >113dB, "A" weighted
  • THD+Noise: <0.003%, typical at +4dBu, 1kHz
  • Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
  • Noise Reduction: Up to 10dB of dynamic broadband noise reduction
  • Digital Resolution: 24 Bits
  • Sample Frequency: 48kHz
  • Latency: 2m sec

Power Supply

  • Operating Voltage: 120VAC 60Hz, 220240VAC 50/60Hz
  • Power consumption: 17W
  • Main Connection: IEC receptacle
  • Dimensions: 3.5" H x 19" W x 7.9" D

Manufacturer: DBX

View full details